Towing a trailer can be stressful when sway starts to take over.
Have you ever felt your trailer wobble on the highway and wondered how to stop it before things get dangerous?
The secret to smooth towing isn’t just controlling sway—it’s eliminating it altogether. That’s where a smart anti-sway hitch like ProPride’s 3P® Hitch comes in. With its patented Pivot Point Projection™ technology, our hitch creates a virtual pivot point that stabilizes your trailer much like a fifth wheel, preventing sway from ever starting.
But beyond the right hitch, smooth towing relies on three crucial things: proper weight distribution, choosing the right tow vehicle, and setting up your hitch perfectly. When these elements work together, you get a safer, more comfortable ride every time.
In this blog, we will cover:
Let’s get started!
To tow smoothly, focus on how your trailer’s weight is spread out, choose the right tow vehicle, and make sure your hitch is installed correctly. These factors work together to keep your trailer steady on the road.
Balance your trailer's weight from front to back and side to side.
Too much weight at the rear can cause sway, while too much weight on the tongue can overload your tow vehicle. Use a scale to check your trailer’s tongue weight and keep it about 10-15% of the trailer’s total loaded weight.
Load heavy items low and toward the front of the trailer. This lowers the center of gravity and helps reduce sway. Make sure the load is centered so one side is not heavier than the other.
Proper weight distribution helps your vehicle steer straight and improves stability.
Your vehicle must have enough towing capacity for your trailer's size and weight.
Check the manufacturer's towing limits in your vehicle's manual to avoid overloading. A vehicle underpowered or too light compared to your trailer will struggle and increase sway risks.
Look for trucks or SUVs with strong frames and advanced suspensions for better control and weight management. If you tow often or with heavier loads, consider a vehicle with towing features like trailer brake controllers and built-in sway reduction systems.
Install your hitch at the correct height to keep your trailer level.
Use an adjustable hitch bar to maintain the correct height between the tow vehicle and trailer.
The ProPride 3P® hitch uses patented Pivot Point Projection™ technology to create a virtual pivot point near your trailer's axle. This makes towing feel more like a fifth-wheel setup, with greater control and no sway. Make sure the hitch head and frame bracket are tight without extra play.
Avoid friction-based hitches. They only reduce sway after it starts instead of eliminating it. The right anti-sway hitch protects you from dangerous trailer movements and gives you a smoother ride.
Controlling trailer sway starts with the right tools and good practices. Use devices that stabilize your trailer, keep your tires at the proper pressure, and drive in ways that minimize sway risk.
Use a dedicated sway control device to stop your trailer from swaying.
The ProPride 3P® hitch uses Pivot Point Projection™ technology to create a virtual pivot point between your truck and trailer, eliminating sway instead of resisting it like friction hitches.
The 3P hitch installs easily without drilling and features an adjustable offset hitch bar. It's one-piece yoke design offers better weight distribution and steadier towing. A top-rated anti-sway hitch can significantly reduce the anxiety of towing in windy or tricky road conditions.
Keep your truck's and trailer's tires inflated to the manufacturer's recommended levels.
Under-inflated tires cause poor handling and increase sway chances, while over-inflated tires may reduce traction.
Check tire pressure regularly, especially before long trips or heavy loads. Use a reliable gauge and adjust tires when cold for the most accurate reading. Remember to check your spare tire.
Balanced tires give you better control, reduce wear, and improve towing safety.
How you drive affects trailer sway.
Avoid sudden lane changes, sharp turns, and quick acceleration or braking. If you feel sway starting, gently ease off the gas and hold the steering steady—don't overcorrect by jerking the wheel.
Maintaining a consistent speed, especially when climbing hills or driving on windy roads. Leave extra space between you and other vehicles to avoid sudden braking. Slow down gradually if the wind picks up or you hit rough patches.
Smooth, steady driving reduces the forces that cause your trailer to move off-center.
Keep your towing setup in top shape by focusing on suspension, brakes, and how your load is secured. These steps help you avoid sway and ensure a safe, smooth drive.
Check suspension components for rust, cracks, or broken springs. Worn suspension can cause uneven weight distribution and increase sway risk.
Test your trailer's brakes before each trip by applying them gently at low speed. Look for worn pads, leaking brake fluid, or unusual noises. Proper brake adjustment keeps your trailer stable, especially on downhills.
Make sure wheel bearings are greased and spin smoothly without play. Faulty bearings can cause wheel wobble and shake, creating sway. Regular inspections maintain weight distribution and improve towing safety.
Loose or shifting cargo often causes trailer sway.
An anti-sway hitch like the ProPride 3P® complements secure loads by controlling unwanted trailer movement, but it can’t fix poor load management. Make these checks part of your routine to improve towing safety and comfort.
Towing safely is all about knowing the right gear, techniques, and maintenance to keep your trailer steady on the road. Curious about common towing concerns or how to handle tricky situations? Let’s answer some of the top questions drivers ask about towing without sway—helping you tow smarter and worry less.
Strong crosswinds can push your trailer sideways, increasing sway risk. Slow down, keep a firm grip on the wheel, and avoid sudden steering moves. Using an anti-sway hitch also greatly reduces wind impact for safer towing.
Yes, misaligned tires on your tow vehicle or trailer create uneven wear and handling issues, contributing to sway. Regularly check and correct alignment to keep your towing stable and your tires lasting longer.
Definitely, friction hitches resist sway once it starts, using brakes or friction pads. Pivot-point hitches like ProPride’s 3P® prevent sway proactively by creating a virtual pivot near the trailer axle, offering smoother, safer control.
Trailer brakes play a big role in controlling sway, especially on downhill or stop-and-go driving. Regularly inspect brake pads, fluid levels, and responsiveness to ensure your brakes help keep your trailer steady and safe.
If you feel wobbling, excessive noise, or uneven tire wear, your hitch or sway device may need tuning. Also check for loose bolts or play in connections. Proper adjustment keeps your setup responsive and sway-free.